Safetor Poly Panel Anchor
Safetor Height Safety Insulated Panel Anchors Will:
- Reduce loading on the Poly Panels if a fall occurs
- Absorb energy without becoming brittle through stress loading or cold temperatures
- Survive in the most severe environments without rusting or corroding
- Repel water because of the powder coating we use. Snow and ice won’t stick to the anchor
- Comply to all building codes and standards
- Safetor Anchors exceed the testing mandate. This is well-proven and fully documented
Safetor Height Safety Insulated Panel Anchors are compliant to the AS/NZS 5532.2013 anchor testing Standard. Poly Panel Technical Information read more…
Design
To design a safe anchor product that works on coolstore buildings, we have worked with Metalcraft Insulated Panels Systems Division to arrive at a suitable point of attachment. The Safetor Insulated Flat Panel Anchor (SPPA) is a new shock absorbing fall protection anchor device, designed to protect both the worker and the building that it is attached to. For use on Flat Panels.
Reduce Loading
The anchors we have designed for use on coolstore buildings are able to bend and absorb the full force of the load on the Poly Panel. If a fall were to occur, the panel will be protected from damage.
Approved by
The SPPA height safety anchor is the only safety anchor approved by Metalcraft for installation on Metalcraft Insulated Coolstore Panels.
Product Technical Statement
Anchor Detail
Dynamic Drop testing
Anchor Detail:
Coatings
Kulorthene ABCITE thermoplastic powder coatings.
Kulorthene Series ABCITE thermoplastic powder coatings have been developed specifically for enhanced long term corrosion protection, high impact strength and excellent exterior weathering. Read more…
