Safetor Trapezoidal Poly Panel Anchor
Safetor Height Safety Insulated Panel Anchors Will:
- Reduce loading on the Poly Panels if a fall occurs
- Absorb energy without becoming brittle through stress loading or cold temperatures
- Survive in the most severe environments without rusting or corroding
- Repel water because of the powder coating we use. Snow or ice won’t stick to the anchor
- Comply to all building codes and standards
- Safetor Anchors exceed the testing mandate. This is well-proven and fully documented
- Our range of Poly Panel anchors are manufactured in New Zealand
Safetor Height Safety Insulated Panel Anchors are compliant to the AS/NZS 5532.2013 anchor testing Standard Poly Panel Technical Information read more…
Design:
To design a safe anchor product that works on cool store buildings, we at Collins Corporation Ltd. worked with Metalcraft Insulated Panels Systems Division to arrive at a suitable point of attachment. The Safetor Poly Panel Anchor (SPP-TA) is a new shock absorbing fall protection anchor device, designed to protect both the worker and the building that it is attached to. For use on Trapezoidal Panels.
Reduce Loading:
The anchors we have designed for use on cool store buildings are able to bend and absorb the full force of the load on the Poly Panel. If a fall were to occur, the panel would be protected from damage.
Approved by
The SPPA height safety anchor is the only one approved by Metalcraft for installation on Metalcraft Insulated Coolstore Panels.
Coatings
Plascoat PPA 571 ES is resistant to stress cracking, adverse weather conditions, detergents, salt spray and typical airborne pollutants. The coating maintains excellent adhesion to the metal substrate without the need for a separate primer. The material also provides good abrasion and impact resistance.
Anchor Detail:
