Coolstore Anchors
Safetor Coolstore Anchors:
Safetor Coolstore Roof Anchors meet all the following relevant performance and testing requirements of the AS/NZS Standards: AS/NZS 5532 : 2013, AS/NZS 1891.4: 2009, AS/NZS 1891.2: 2001, AS/NZS 4488.1 & 2: 1997 and performance requirements of the Building Codes.
To date Safetor are the only height safety anchors to have undergone full compliance testing to 6.3.2 dynamic testing procedures of AS/NZS 5532:2013 on coolstore Poly Panels.
Safetor Height Safety Concrete Anchors Will:
- Reduce loading on the structure if a fall occurs
- Absorb energy without becoming brittle through stress loading or cold temperatures
- Survive in the most severe environments without rusting or corroding
- Repel water because of the powder coating we use. Snow and ice won’t stick to the anchor
- Comply to all building codes and standards
- Safetor Anchors exceed the testing mandate. This is well-proven and fully documented
- Our range of Poly Panel anchors are manufactured in New Zealand
Design:
To design a safe anchor product that works on cool store buildings, we at Collins Corporation Ltd. worked with Metalcraft Insulated Panels Systems Division to arrive at a suitable point of attachment. The Safetor Insulated Flat Panel Anchor (SPPA) is a new shock absorbing fall protection anchor device, designed to protect both the worker and the building that it is attached to.
Technical Information:
All Coolstore Anchor Sales Nationwide
For all price related inquiries please contact Nick at: nick.roofanchors@gmail.com
Approved by
The Safetor Poly Panel height safety anchors are the only anchors fully tested by QSI to the AS/NZS 5532.2013 Standards, and approved by Metalcraft for installation on Insulated Coolstore Panels.
Warning:
Only competent users who have received training should use this equipment. (Refer to the AS/NZS 1891.4:2009 recommendations concerning selection, use and maintenance.)