Coolstore Anchors
Safetor Coolstore Anchors:
Safetor Coolstore Roof Anchors meet all the following relevant performance and testing requirements of the AS/NZS Standards: AS/NZS 5532 : 2013, AS/NZS 1891.4: 2009, AS/NZS 1891.2: 2001.
To date Safetor are the only height safety anchors to have undergone full compliance testing to 6.3.2 dynamic testing procedures of AS/NZS 5532:2013 on coolstore Poly Panels.
Safetor Height Safety Anchors
Are protected with a robust Thermoplastic Powder Coating which must be inspected before and after use for any surface scratches that has damaged the coating system. It is most important that these scratches are addressed straight away. It is very simple, all you need to do is use a heat gun to fuse the Thermoplastic Powder Coating back together to remove the scratch altogether.Safetor Height Safety Concrete Anchors Will:
- Reduce loading on the structure if a fall occurs
- Absorb energy without becoming brittle through stress loading or cold temperatures
- Survive in the most severe environments without rusting or corroding
- Repel water because of the powder coating we use. Snow and ice won’t stick to the anchor
- Comply to all building codes and standards
- Safetor Anchors exceed the testing mandate. This is well-proven and fully documented
- Our range of Poly Panel anchors are manufactured in New Zealand
Design:
To design a safe anchor product that works on cool store buildings, we at Collins Corporation Ltd. worked with Metalcraft Insulated Panels Systems Division to arrive at a suitable point of attachment. The Safetor Insulated Flat Panel Anchor (SPPA) is a new shock absorbing fall protection anchor device, designed to protect both the worker and the building that it is attached to.
Technical Information:
All Coolstore Anchor Sales Nationwide
For all price related inquiries please contact Nick at: nick.roofanchors@gmail.com
Approved by
The Safetor Poly Panel height safety anchors are the only anchors fully tested by QSI to the AS/NZS 5532.2013 Standards, and approved by Metalcraft for installation on Insulated Coolstore Panels.
Warning:
Only competent users who have received training should use this equipment. (Refer to the AS/NZS 1891.4:2009 recommendations concerning selection, use and maintenance.)